Wiki

Analog Devices Wiki

English
English
简体中文
简体中文
日本語
日本語
Руccкий
Руccкий

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
resources:eval:developer-kits:2to24ghz-mxfe-rf-front-end:layout-mockup [24 Jan 2023 20:08] – added link to parent page at the top Brad Hallresources:eval:developer-kits:2to24ghz-mxfe-rf-front-end:layout-mockup [11 Apr 2023 17:57] (current) – Updated Chance Fletcher
Line 1: Line 1:
 [[:resources:eval:developer-kits:2to24ghz-mxfe-rf-front-end | Link to parent page]] [[:resources:eval:developer-kits:2to24ghz-mxfe-rf-front-end | Link to parent page]]
 ======Size Estimate====== ======Size Estimate======
-The example layout below provides an effective size estimate for the Rx downconverter and Tx upconverter RF signal chains. The Rx signal chain itself requires roughly 4.3 x 1.2in (110 x 30mm) in area using common RF PCB layout practices, and can likely be optimized to fit in a smaller surface area depending on system size constraints. The Tx signal chain requires roughly 4.3 x 0.9in (110 x 23mm) and likewise leaves room for modification & optimization.+The example layout below provides an effective size estimate for the RF front end. The total PCB measures 5 x 2in (127 x 50.8mm). Information regarding the different channels or circuits size requirements are highlighted below: 
 +  - Rx ch = 4.00 sq. in 
 +  - Tx ch = 3.53 sq. in 
 +  - Digitizer + clk = 4.00 sq. in 
 +  - RF PSN = 0.88 sq. in 
 +  - Digitizer PSN = 2.56 sq. in 
 +  - Fixed LO = 1.13 sq. in 
 +  - Tunable LO = 3.90 sq. in
  
 \\ \\
 \\ \\
-{{ :resources:eval:developer-kits:2to24ghz-mxfe-rf-front-end:3d_layout_mockup.jpg?900 |}}+{{ :resources:eval:developer-kits:2to24ghz-mxfe-rf-front-end:layoutstudy.jpg?900 |}}
resources/eval/developer-kits/2to24ghz-mxfe-rf-front-end/layout-mockup.txt · Last modified: 11 Apr 2023 17:57 by Chance Fletcher

Page Tools