Wiki

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Last revisionBoth sides next revision
resources:eval:developer-kits:2to24ghz-mxfe-rf-front-end:layout-mockup [21 Jul 2022 16:36] – save progress David Brownresources:eval:developer-kits:2to24ghz-mxfe-rf-front-end:layout-mockup [24 Jan 2023 20:08] – added link to parent page at the top Brad Hall
Line 1: Line 1:
 +[[:resources:eval:developer-kits:2to24ghz-mxfe-rf-front-end | Link to parent page]]
 ======Size Estimate====== ======Size Estimate======
 The example layout below provides an effective size estimate for the Rx downconverter and Tx upconverter RF signal chains. The Rx signal chain itself requires roughly 4.3 x 1.2in (110 x 30mm) in area using common RF PCB layout practices, and can likely be optimized to fit in a smaller surface area depending on system size constraints. The Tx signal chain requires roughly 4.3 x 0.9in (110 x 23mm) and likewise leaves room for modification & optimization. The example layout below provides an effective size estimate for the Rx downconverter and Tx upconverter RF signal chains. The Rx signal chain itself requires roughly 4.3 x 1.2in (110 x 30mm) in area using common RF PCB layout practices, and can likely be optimized to fit in a smaller surface area depending on system size constraints. The Tx signal chain requires roughly 4.3 x 0.9in (110 x 23mm) and likewise leaves room for modification & optimization.
resources/eval/developer-kits/2to24ghz-mxfe-rf-front-end/layout-mockup.txt · Last modified: 11 Apr 2023 17:57 by Chance Fletcher