Wiki

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
resources:eval:adl5920-eval-kit [27 Sep 2018 21:25] andy moresources:eval:adl5920-eval-kit [27 Sep 2018 23:53] (current) andy mo
Line 20: Line 20:
   - Connect signal generator to RF_IN(J1) on the ADL5920 shield.    - Connect signal generator to RF_IN(J1) on the ADL5920 shield. 
   - Connect RF load to RF_OUT.   - Connect RF load to RF_OUT.
-  - Turn on signal generator, set frequency between 9KHz and GHz. Set RF power below 30dBm.+  - Turn on signal generator, set frequency between 9KHz and GHz. Set RF power below 30dBm.
   - Go to www.analog.com and download and install quikeval.   - Go to www.analog.com and download and install quikeval.
   - Open quikeval, set frequency, click “READ” to measure forward and reverse RMS power using default calibration. See Figure 2.   - Open quikeval, set frequency, click “READ” to measure forward and reverse RMS power using default calibration. See Figure 2.
resources/eval/adl5920-eval-kit.txt · Last modified: 27 Sep 2018 23:53 by andy mo