Wiki

This version is outdated by a newer approved version.DiffThis version (05 Jul 2022 21:33) was approved by Harshvardhan Bhatia.

This is an old revision of the document!


EVAL-ADTF3175D-NXZ Startup Guide

Kit Contents

  • ADTF3175-NXZ Evaluation Module
    • ADTF3175 Imager Module
    • i.MX8 M Plus SOM (SolidRun)
    • Camera Interface Board
    • ADSD3500 Interposer board
  • 16GB flashed microSD card (Inserted in module sd card slot)
  • USB-C to USB-C cable. Supports PD 2.0, and USB 3.1
  • Tripod

Software Download

  • GUI Install Guide: Available July-4th

Startup

  • Remove camera from packaging
  • Mount camera. Orientation shown in image below

  • Connect USB-C cable to module

  • Connect USB-C to laptop
  • The following leds must turn on before moving to next steps:
    • Green led under USB-C connector
    • Blinking led on NXP SOM
    • Blue led on ADSD3500 interposer board
  • Look at available network connections, an 'Unidentified Network' with no internet access must show up, as shown in the image below

Troubleshooting

eval-adtf3175d-nxz-startup.1656590400.txt.gz · Last modified: 30 Jun 2022 14:00 by Harshvardhan Bhatia