This version is outdated by a newer approved version.DiffThis version (21 Mar 2022 21:56) was approved by Harshvardhan Bhatia.

This is an old revision of the document!

EVAL-ADTF3175-NXZ Startup Guide

Kit Contents

  • ADTF3175-NXZ Evaluation Module
    • ADTF3175 Imager Module
    • i.MX8 M Plus SOM (SolidRun)
    • Camera Interface Board
  • 16GB flashed microSD card (Inserted in module sd card slot)
  • USB-C to USB-C cable. Supports PD 2.0, and USB 3.1
  • Tripod

Software Download

  • GUI Install Guide: link


  • Remove camera from packaging
  • Mount camera. Orientation shown in image below

  • Connect USB-C cable to module

  • Connect USB-C to laptop
  • Wait for green light under the USB-C connector on the module light up
  • Run GUI


eval-adtf3175-nxz-startup.1647896192.txt.gz · Last modified: 21 Mar 2022 21:56 by Harshvardhan Bhatia