Wiki

This version (14 Mar 2013 09:30) was approved by Dragos Bogdan.The Previously approved version (13 Mar 2013 18:36) is available.

This section presents the steps for developing a software application that will run on the Renesas Demo Kit for RL78G14 for controlling and monitoring the operation of the ADI part.

Run the e2studio integrated development environment.
Choose to create a new project (File – New –C Project).
Select Executable (Renesas) - Sample Project type and the KPIT GNURL78-ELF toolchain.
Name the project(ADIEvalBoard for example) and click Next.

In the Select Target field select RL78G14-R5F104PJ-R5F104PJ device, ensure that all the other settings are the same as in the picture below and click Finish.

Click OK to generate the project when the Project Summary window appears.
Open the project’s options window (Project – Properties).
Select Settings from the C/CBuild**// category. In the //**Tool Settings**// tab, locate //**Debug level**// field and select //**Level3: Maximum. Allows Macro Debugging(-g3)**// and set the //**Debug format**// field to //**DWARF**//. Click //**OK**//. {{ :resources:tools-software:uc-drivers:renesas:rl78g14_e2studio_3.jpg? }} * Extract the files from the ADIDriver.zip archive and drag the folder with the files to the existing src folder in the Project Explorer. Delete the automatically generated C file: ADIEvalBoard.c from the project. * Before building the project there is one more step that needs to be done. Communication and TIME drivers use interrupts that have the service routines defined in the interrupt_handlers.c file. Open the file, declare IICA0_Flag as a char type and overflowCounter as a short type.
* Fill the //**void INT_IICA0 (void)**// with the following line: //**IICA0_Flag = 1;**// * Fill the //**void INT_TM00 (void)**// with the following line: //**overflowCounter++;**//

* The project is ready to be built. This can be done from the menu: select Project-BuildProject. * To download and debug the project select Run-Debug Configurations…, click on Renesas GDB Hardware Debbugging and select ADIEvalBoard, then click Debug.

Analog Devices Wiki

Page Tools