Differences

This shows you the differences between two versions of the page.

--- resources:fpga:xilinx:kc705:adv7511 [24 Jul 2014 16:03] – added information about how to program a FPGA after an Engineer Zone discussion Lucian Sin
+++ resources:fpga:xilinx:kc705:adv7511 [15 Sep 2014 19:12] – [Software Setup for Vivado] -Link Correction Kevin Goodspeed
@@ Line 132: / Line 132: @@
 Example for a ZC702 board:
-  * After [[http://wiki.analog.com/resources/fpga/docs/hdl/vivado | building the project in Vivado]] for the used FPGA board, a //**SDK_Export**// folder will be created in //**../adv7511_board.sdk/SDK**//
+  * After [[http://wiki.analog.com/resources/fpga/docs/hdl#building_on_vivado | building the project in Vivado]] for the used FPGA board, a //**SDK_Export**// folder will be created in //**../adv7511_board.sdk/SDK**//
   * Open the Xilinx SDK for Vivado. When the SDK starts it asks to provide a folder where to store the workspace. Any folder can be provided.
   * Go to //**File->New->Application project**//

Wiki