Wiki

Below is the source of this page. To edit this source as well as other pages on the wiki, you must login.

====== Setup a UART ======

A UART terminal (serial console) can be used to capture the output of the example application. The number of used UART port depends on the computer's configuration. The following settings must be used in the UART terminal:
      * **Baud Rate:** 115200bps
      * **Data:** 8 bit
      * **Parity:** None
      * **Stop bits:** 1 bit
      * **Flow Control:** none

===== On Windows =====
Exampele of terminal emulators on Windows [[https://ttssh2.osdn.jp/index.html.en|TeraTerm]] or [[https://www.putty.org/|PuTTy]]
\\ **Setting up Tera Term**
  * Open Tera Term
  * Select **Serial** and your Port: (COMx)
  * Setup -> Serial port...

===== On Linux =====
[[https://elinux.org/Communicate_with_hardware_using_USB_cable_for_Ubuntu|GTKterm]]
[[https://help.ubuntu.com/community/Minicom|Minicom]]

\\
See Also:
  * http://www.wiki.xilinx.com/Setup+a+Serial+Console

Analog Devices Wiki

Page Tools