This version (13 Nov 2019 12:54) was approved by Istvan Csomortani.The Previously approved version (14 Mar 2018 13:31) is available.
Running software on the hardware
In almost all cases, HDL build alone will NOT let you do anything useful. You would need a software running on the processor (Microblaze, NIOS or ARM) to make the design work.
We provide two software solutions:
Example Projects
The following projects are the recommended platforms for running the HDL on hardware.
LVDS/SERDES/CMOS interface:
JESD204B interface:
SPI Engine interface:
System On Module:
Standalone projects:
Other than the above, we have reference designs covering a wide range of boards. The whole list of supported projects can be found here
You may need additional tools, that may be in separate repositories. The main documentation on how to build the software is part of the product's user guide.
Navigation - HDL User Guide
resources/fpga/docs/run.txt · Last modified: 13 Nov 2019 12:53 by Istvan Csomortani