| Both sides previous revisionPrevious revision | Next revisionBoth sides next revision |
| resources:fpga:altera:ced1z:adas3022 [15 Feb 2013 21:38] – [Overview] Andrei Cozma | resources:fpga:altera:ced1z:adas3022 [08 Apr 2013 14:31] – Corrected the name of the Evaluation Board Adrian Costina |
|---|
| | AVALON_MASTER_WRITEDATA_O | OUT | 32 | Master write data bus | | | AVALON_MASTER_WRITEDATA_O | OUT | 32 | Master write data bus | |
| | //**External connectors**// |||| | | //**External connectors**// |||| |
| | BDB_IO | I/O | 16 | Bidirectional data bus used to write/read data to/from the AD7625_26EDZ board | | | BDB_IO | I/O | 16 | Bidirectional data bus used to write/read data to/from the ADAS3022EDZ board | |
| | BBUSY_I | IN | 1 | Signal that indicates the status of the conversion. Once the conversion is complete and the result is available in the output register, the BUSY output goes high | | | BBUSY_I | IN | 1 | Signal that indicates the status of the conversion. Once the conversion is complete and the result is available in the output register, the BUSY output goes high | |
| | BRD_N_O | OUT | 1 | Signal used by the CED1Z board to read data from the AD7625_26EDZ board | | | BRD_N_O | OUT | 1 | Signal used by the CED1Z board to read data from the ADAS3022EDZ board | |
| | BWR_N_O | OUT | 1 | Signal used by the CED1Z board to write data to the AD7625_26EDZ board | | | BWR_N_O | OUT | 1 | Signal used by the CED1Z board to write data to the ADAS3022EDZ board | |
| | BADDR_O | OUT | 3 | Used to select the register to be read from the AD7625_26EDZ board. | | | BADDR_O | OUT | 3 | Used to select the register to be read from the ADAS3022EDZ board. | |
| | BRESET_O | OUT | 1 | Used to reset the evaluation board | | | BRESET_O | OUT | 1 | Used to reset the evaluation board | |
| | **Table 2 Port description** |||| | | **Table 2 Port description** |||| |
