This version is outdated by a newer approved version.
This version (11 Sep 2012 17:42) was approved by Michael Fowler.
This version (11 Sep 2012 17:42) was approved by Michael Fowler.This is an old revision of the document!
Table of Contents
Debugging the DPG 2/3
DPGDownloader Only Shows Generic Eval
Verify Driver Installation
Ensure that the DPG2 and the eval board are detected in the Device Manager:
If the two devices do not appear as shown, reinstall the latest version of DPGDownloader.
Restart Evaluation Board Service
Open the Start Menu, click Run, then type services.msc, click OK Select the Analog Devices Evaluation Board Service and click Restart the Service.
Verify DLL File is Present
Verify that the appropriate DLL for your evaluation board is present in: C:\Program Files (x86)\Analog Devices\DPG\ the file is named: AnalogDevices.DPG.EvalBoard.ADXXXX.dll where XXXX is the part number of your evaluation board. If the file is not present install the DAC update file for your evaluation board.
resources/eval/dpg/debugging.1337973138.txt.gz · Last modified: 25 May 2012 21:12 by Michael Fowler