http://wiki.analog.com/ 2013-05-24T06:04:18+02:00 FeedCreator 1.7.2-ppt DokuWiki 2013-05-23T16:59:38+02:00 2013-05-23T16:59:38+02:00 http://wiki.analog.com/resources/tools-software/uc-drivers/adf7023?rev=1369321178&do=diff DragosB

Supported Devices * ADF7023 Evaluation Boards * PmodRF3 Overview The ADF7023 is a very low power, high performance, highly integrated 2FSK/GFSK/OOK/MSK/GMSK transceiver designed for operation in the 862 MHz to 928 MHz and 431 MHz to 464 MHz frequency bands, which cover the worldwide license-free ISM bands at 433 MHz, 868 MHz, and 915 MHz. It is suitable for circuit applications that operate under the European ETSI EN300-220, the North American FCC (Part 15), the Chinese short-range wire…

2013-05-23T16:37:45+02:00 2013-05-23T16:37:45+02:00 http://wiki.analog.com/resources/tools-software/uc-drivers/renesas/ad7193?rev=1369319865&do=diff LucianS

Supported Devices * AD7193 Evaluation Boards * PmodAD5 Overview The AD7193 is a low noise, complete analog front end for high precision measurement applications. It contains a low noise, 24-bit sigma-delta (Σ-Δ) analog-to-digital converter (ADC). The on-chip low noise gain stage means that signals of small amplitude can interface directly to the ADC.

2013-05-23T14:51:26+02:00 2013-05-23T14:51:26+02:00 http://wiki.analog.com/resources/tools-software/uc-drivers/renesas/ad7091r?rev=1369313486&do=diff LucianS

Supported Devices * AD7091R Evaluation Boards * PmodAD6 Overview The AD7091R is a 12-bit successive approximation analog-to-digital converter (ADC) that offers ultralow power consumption (typically 349 µA at 3 V and 1 MSPS) while achieving fast throughput rates (1 MSPS with a 50 MHz SCLK). The AD7091R uses advanced design and process techniques to achieve this very low power dissipation at high throughput rates. The part also features an on-chip, accurate 2.5 V reference.

2013-05-23T10:03:57+02:00 2013-05-23T10:03:57+02:00 http://wiki.analog.com/resources/tools-software/uc-drivers/renesas/adf7023?rev=1369296237&do=diff LucianS

Supported Devices * ADF7023 Evaluation Boards * PmodRF3 Overview The ADF7023 is a very low power, high performance, highly integrated 2FSK/GFSK/OOK/MSK/GMSK transceiver designed for operation in the 862 MHz to 928 MHz and 431 MHz to 464 MHz frequency bands, which cover the worldwide license-free ISM bands at 433 MHz, 868 MHz, and 915 MHz. It is suitable for circuit applications that operate under the European ETSI EN300-220, the North American FCC (Part 15), the Chinese short-range wire…

2013-05-22T23:00:58+02:00 2013-05-22T23:00:58+02:00 http://wiki.analog.com/resources/eval/user-guides/inertial-mems/accelerometers/adxl362/eval-adxl362z-db_rev0?rev=1369256458&do=diff nitzan

Thanks for visiting! This page has has instructions that apply to the Rev 0 Datalogger Board. If your board is labeled REV 2 (on the back), please visit this page instead. Resources Kit Contents 1 x ADXL362 Datalogger / Development Board 1 x MicroSD card with USB reader 1 x USB cable 1 x E-Ink electronic paper display 1 x Piece of double-sided foam tape

2013-05-22T19:14:01+02:00 2013-05-22T19:14:01+02:00 http://wiki.analog.com/resources/eval/user-guides/ad-fmcomms1-ebz/hardware/bom_improvements?rev=1369242841&do=diff rejeesh

BOM Improvements Transmit Path Changing the ADF4351 output filter by changing the values of L17 and L18 from 3.9nH to 10nH will remove the Notch at 450 MHz when sweeping LOThe location of these components on the board is highlighted in this figureChanging the loop filter of the ADF4351 by changing the component values as shown in this figure, will improve the phase noise by about 20 dB up to 1MHzThe location of these components on the board is highlighted in this figure Receive Path Changing th…

2013-05-22T19:09:21+02:00 2013-05-22T19:09:21+02:00 http://wiki.analog.com/resources/eval/user-guides/ad-fmcomms1-ebz?rev=1369242561&do=diff charlyelkhoury

* Introduction * The math behind the RF * Quick Start Guides * Linux on ML605 * Linux on KC705 * Linux on ZC702, ZC706, ZED * no-OS Drivers on ML605, KC705 * Hardware (including schematics) * Functional Overview * Card specifications * Configuration options * BOM Improvements

2013-05-22T13:33:08+02:00 2013-05-22T13:33:08+02:00 http://wiki.analog.com/resources/alliances/altera?rev=1369222388&do=diff CsomI

Below is a list of hardware, IP Cores, or reference designs. While this content is believed to be reliable, many have not been validated, verified or reviewed by Analog Devices. These boards/platforms may or may not be suitable for end product integration or development, and may not meet datasheet specifications. Since many of these platforms or IP Cores are not designed or reviewed by Analog Devices, care should be taken to ensure that these will meet your needs before purchase. While ADI will …

2013-05-22T11:08:16+02:00 2013-05-22T11:08:16+02:00 http://wiki.analog.com/resources/fpga/altera/ced1z/ad7262?rev=1369213696&do=diff CsomI

Supported Devices * AD7262 Evaluation Boards * EVAL-AD7262EDZ This document presents the steps to setup an environment for using the EVAL-AD7262EDZ evaluation board together with the EVAL-CED Converter Evaluation and Development (CED) Board and the Nios II Embedded Development Suite (EDS). Below is presented a picture of the EVAL-AD7262 Evaluation Board with the CED1 board.

2013-05-20T22:39:41+02:00 2013-05-20T22:39:41+02:00 http://wiki.analog.com/resources/eval/user-guides/ad-fmcomms1-ebz/hardware/card_specification?rev=1369082381&do=diff charlyelkhoury

Transmit Specs There are many specifications on the Transmit side of a RF system * Evaluating High Speed DAC Performance Theoretical specs Bandwidth Determining overall channel bandwidth is a little complex, since many devices don't have a meaningful (in this aspect) bandwidth number. <div class="tocheader toctoggle" id="toc__header" style="cursor: pointer; text-align:center;clear:both">Navigation - AD-FMCOMMS1-EBZ</div> <div id="toc__inside" style="text-align:center;padding:1em;position:…

2013-05-15T21:52:39+02:00 2013-05-15T21:52:39+02:00 http://wiki.analog.com/resources/fpga/xilinx/hints/pcore_register_map?rev=1368647559&do=diff rejeesh

Overview The table below lists the common register map used by all the device pcores in the reference designs. All the registers are dword based and do not support byte addressing. That is, a read at byte address 0x01, 0x02 or 0x03 all return the register at byte address 0x00. The registers are grouped as per functionality, any exceptions may be noted on the specific pcore documentation.

2013-05-14T17:04:30+02:00 2013-05-14T17:04:30+02:00 http://wiki.analog.com/resources/eval/user-guides?rev=1368543870&do=diff JFitzger

Amplifiers User Guide for AD8232 Single-Lead Heart Rate Monitor Front End Evaluation Board * AD8232 Analog to Digital Converters User Guide for 14-/16-/18-Bit ADCs from the 10 LEAD PulSAR® Family * AD7685, AD7686, AD7687, AD7688, AD7690, AD7691, AD7980, AD7982, AD7983, AD7984, AD7988-1/AD7988-5

2013-05-13T23:45:57+02:00 2013-05-13T23:45:57+02:00 http://wiki.analog.com/resources/eval/user-guides/circuits-from-the-lab/cn0301?rev=1368481557&do=diff JFitzger

Overview CN-0301 is a linear variable differential transformer (LVDT) signal conditioning circuit. The system converts the output of the LVDT sensor to a unipolar DC voltage and drives the inputs of a successive approximation analog-to-digital converter (ADC).

2013-05-13T22:41:50+02:00 2013-05-13T22:41:50+02:00 http://wiki.analog.com/resources/eval/user-guides/circuits-from-the-lab/cn0271?rev=1368477710&do=diff JFitzger

Overview CN-0271 is a complete thermocouple signal conditioning circuit with cold junction compensation followed by a 16-bit sigma-delta (Σ-Δ) analog-to-digital converter (ADC). The AD8495 thermocouple amplifier provides a simple, low cost solution for measuring K type thermocouple temperatures, including cold junction compensation.

2013-05-13T20:50:23+02:00 2013-05-13T20:50:23+02:00 http://wiki.analog.com/resources/eval/user-guides/circuits-from-the-lab/cn0288?rev=1368471023&do=diff JFitzger

Overview CN-0288 is a linear variable differential transformer (LVDT) signal conditioning circuit. The system converts the output of the LVDT sensor to a unipolar DC voltage and drives the inputs of a successive approximation analog-to-digital converter (ADC).

2013-05-13T20:08:01+02:00 2013-05-13T20:08:01+02:00 http://wiki.analog.com/resources/eval/user-guides/circuits-from-the-lab/cn0272?rev=1368468481&do=diff JFitzger

Overview CN-0272 is a high-speed photodiode signal conditioning circuit with dark current compensation. The system converts current from a high-speed silicon PIN photodiode and drives the inputs of a 20 MSPS ADC. This combination of parts offers spectral sensitivity from 400 nm to 1050 nm with 49 nA of photocurrent sensitivity, a dynamic range of 91 dB and 2 MHz of bandwidth. The signal conditioning circuitry of the system consumes only 40 mA of current from the ±5 V supplies making this config…

2013-05-13T19:49:20+02:00 2013-05-13T19:49:20+02:00 http://wiki.analog.com/resources/eval/user-guides/circuits-from-the-lab/cn0251?rev=1368467360&do=diff JFitzger

Overview CN-0251 is a flexible signal conditioning circuit for processing signals of wide dynamic range, varying from several mV p-p to 20 V p-p. The circuit provides the necessary conditioning and level shifting and achieves the dynamic range using the internal programmable gain amplifier (PGA) of the high resolution analog-to-digital converter (ADC).

2013-05-13T18:57:32+02:00 2013-05-13T18:57:32+02:00 http://wiki.analog.com/resources/eval/ad9253-125ebz_ad9633-125ebz?rev=1368464252&do=diff DougI

Preface This user guide describes the AD9653, AD9253 and AD9633 evaluation boards, AD9653-125EBZ, AD9253-125EBZ and AD9633-125EBZ, which provide all of the support circuitry required to operate these parts in their various modes and configurations. The application software used to interface with the devices is also described. The AD9653 AD9253 and AD9633 data sheets provide additional information and should be consulted when using the evaluation board. All documents and software tools are a…

2013-05-13T18:45:26+02:00 2013-05-13T18:45:26+02:00 http://wiki.analog.com/resources/eval/ad9266-80ebz_ad9649-80ebz_ad9629-80ebz_ad9609-80ebz?rev=1368463526&do=diff DougI

Preface This QuickStart user guide describes the evaluation boards, AD9266-80EBZ, AD9649-80EBZ, AD9629-80EBZ, and AD9609-80EBZ that are used to evaluate the following Analog Devices, Inc., products: AD9266, AD9649, AD9629, and AD9609. These evaluation boards provide the support circuitry required to operate these devices in their various modes and configurations. The application software used to interface with the devices is also described. The AD9266 , AD9649, AD9629, and AD9609 data sheet…

2013-05-13T18:34:50+02:00 2013-05-13T18:34:50+02:00 http://wiki.analog.com/resources/eval/ad9257-65ebz_ad9637-80ebz?rev=1368462890&do=diff DougI

Preface This user guide describes the AD9257 and AD9637 evaluation boards, AD9257-65EBZ and AD9637-80EBZ, which provide the support circuitry required to operate these parts in their various modes and configurations. The application software used to interface with the devices is also described. The AD9257 and AD9637 data sheets provide additional information and should be consulted when using the evaluation board. All documents and software tools are available at www.analog.com/hsadcevalbo…